P0705

Transmission Range Sensor Circuit Malfunction

Q: What does fault code P0705 mean?

Transmission Range Sensor Circuit Malfunction. The TCM has detected an invalid combination of signals from the transmission range sensor (TR switch).

Q: What are the possible causes of P0705?

Range sensor faulty or improperly adjusted; Sensor connector poor contact; Shift cable improperly adjusted causing incorrect switch position; TCM fault.

Severity: Medium Transmission System Generic Code

Detailed Description

The TCM has detected an invalid combination of signals from the transmission range sensor (TR switch).

Possible Causes

Range sensor faulty or improperly adjusted

Sensor connector poor contact

Shift cable improperly adjusted causing incorrect switch position

TCM fault.

Solutions & Repair Guide

Check the TR switch installation position and adjustment; Check if the shift cable is correctly adjusted; Measure TR switch signal output at each gear position; Replace the switch if signal is abnormal.

Disclaimer: The information above is for reference only and does not constitute professional repair advice. Actual causes may vary depending on vehicle make, model, year, and configuration. Always consult a qualified technician for accurate diagnosis.